Home > Products > Non-standard Chambers >

Drive in custom size IP rain spray water resistant test chamber


Apply to: IP rain spray test

Application:Car,electronics,phone and solar panel

  • Feature
  • Specification

    Lenpure Drive in custom size IP rain spray water resistant test chamber is suitable for detecting the waterproof sealing of the outdoor automotive. Through the waterproofing test room, it can simulate the rainy environment in the natural state of the outside and detect the water sealing state of the motorized train, which is helpful for customer product to make progress


    ●Modern attractive styling
    ●Large capacity
    ●Custom Sizes Available
    ●Modular,Robust Reliable construction
    ●Heavy-duty flooring to support vehicles
    ●Prefabricated for On-Site Installation

    Test Standards

    This test equipment conforms to following test standards (but not limited to):
    ●GJB 150.8-86
    ●ISO/DIS 12346
    ●GB 5170.20-90
    ●GB 4208-93
    ●IEC 529


    Sizes of Drive in test Chambers
    Volume (M³)
    Internal Dimension (mm) D*W*H
    External Dimension (mm) D*W*H
    yle="text-align: center;" x=""> 7000*4000*4000
    As per design drawing
    Basic Specification
    nozzle diameter Φ2.5—3.0mm
    sprinkle density 550×550mm
    Pipe diameter of spray device It depends on the flow
    Pressure 1.5 precision pressure gauge, dial ∮ 100,0 ~ 6kg / cm ², using a pressure sensors
    Flowmeter electromagnetic flowmeter
    Rain gauge It depends on the flow
    pressure of supply water 150±10KPa
    drop rain
    Rain test adjustable
    front wall & upside 6mm±1mm/min
    Side and top 8mm±1mm /min
    Others Reprovision IPX5, IPX6 nozzle for each one
    Standard Configuration Pumps, sewage pumps, filters
    Voltage AC380V±10% 50Hz or as per requirement
    Ambient Enviromental for application 5°C~+30°C ≤ 85%R.H
    Test Standards (not limited to)