Home > Products > Accelerated Aging Chambers >

Air-cooled Xenon Lamp Aging Test Chamber

Model:190L or Customeized

Apply to:Accelerate Aging Test,Xenon Lamp Test

Application:Paint,Plastic,Rubber,Fabric,Cable,Glass etc

  • Feature
  • Specification


    Lenpure Air-cooled Xenon Aging Test Chamber adopts xenon arc-lamp which can realize full wavelength of natural sunlight to the most extent, so that to reappear destructive light radiation of different environment. Also can simulate rainfall, high & low temperature and moisture of natural environment, so that it can perform extremely realistic accelerated weathering test on material and coating layer


    ?High performance and quiet operation (20~ 70 dBa)
    ?Touch-screen controller, user-friendly
    ?Import Q-Lab air-cooled Full spectrum xenon lamp, more economical, more efficient and easier to maintain. Lamp life of 1800 hours.
    ?The flat sample mounting tray can accommodate different shapes and sizes of samples, including 3D parts. There are a variety of sample stents to choose from
    ?The irradiance control system continuously monitors and controls the output of the light, which ensures accurate exposure and repeatable test results.
    ?Allows the user to simultaneously control and monitor relative humidity, blackboard temperature and air temperature in the box.
    ?All circuits fused or circuit breaker protected, overload protection.
    ?All wiring numbered or color coded
    ? Tri-color Indicator and EMO (Emergency-off Switch) available.

    Test Standards

    IEC 68-2 / IEC 60068-2
    ISO 4892-2 / ISO 3917 / ISO 11341 / ISO 105-B02/06 / ISO4665-3
    JISK 6781
    UL 62275

    This test equipment comply with above test standards (but not limited to):

    Volume (L)
    Temperature Range
    Rated Power 
    Internal Dimension (mm) D*W*H
    External Dimension             (mm) D*W*H
    RT10°C ~ 70°C
    Basic Specification
    Temperature Range RT10°C ~ 70°C
    Temperature Fluctuation ±0.5°C
    Temperature Uniformity ±2.0°C
    Blackboard / Black Standard Temperature 60°C ~ 100°C
    Humidity Range 65% ~ 99%
    Humidity Deviation +2 / -3% R.H
    Spray Nozzle Dia Ф0.8mm
    Rainfall Pressure 0.12~0.15Mpa
    Rainfall Time 1~999m, adjustable
    Spray period 18min/102min or 12min/48min
    Illumination period 1~999h、m、s   Continuous adjustable
    Sample holder size 450×720mm
    Radiation Indensity ≤550W/m2
    Wave Length 290~800nm
    Xenon arc lamp power 2.5KW×3 pcs = 7.5KW
    External Casing Cold-rolled A3 (Q235) steel plates with plastics painted. 
    Interior Working Room Stainless Steel Plates SUS304 with miror surface
    Heat Isolation Polyurethane foams and fine glass fibres
    Illumination Lamp Philips® one in per standard test chamber.
    Casters 4pcs, with PU covered for protection. Height adjustable and direction universal. 
    Viewing Window Multi-layer hollow toughened glass with conductive films for heating to defrost
    Door Manually operated sliding door with unlock button
    Heating & Cooling System
    Heater Steipped Nickel-chromium Wire Heater
    Air Blower Anti-temperature stainless fan blades with low noise
    Compressor Hermetically-sealed Techmesh® or semi-sealed Bitzer® or GEA® or equivalent compressors
    Cooling Method Single or dual cooling (Air-cooled or Water-cooled)
    Refrigerant R404A or/and R23 (eco-friendly)
    Condenser Plate-type heat exchanger
    Control System
    Controller 7" Programmable colorful touch-screen display
    LCD English Display
    Microcomputer integrated controller
    Temperature Sensor Platinum Resistance.PT100Ω
    Standard Configuration Test Chamber x 1, Specimen Holder platform x 1, Xenon arc lamp x 1
    Safety Protection Power leakage protection/Compressor over-heat, over-load or over-current protection/Dry burning protection.
    Voltage AC220V/380V/440V±10%, 50Hz/60Hz or as per requirement
    Ambient Enviromental for application 5°C~+30°C ≤ 85% R.H